Stephen Clark
2024-08-21 18:09:43
arstechnica.com
NASA would like to start stacking the Space Launch System rocket for the Artemis II mission—the first human flight around the Moon since 1972—sometime next month, but the agency’s exploration chief says the milestone could be delayed as engineers continue studying the readiness of the Orion spacecraft’s heat shield.
The heat shield, already installed at the base of the Orion spacecraft, will take the brunt of the heating when the capsule blazes through Earth’s atmosphere at the end of the 10-day mission. On the Artemis I test flight in late 2022, NASA sent an Orion spacecraft to the Moon and back without a crew aboard. The only significant blemish on the test flight was a finding that charred chunks of the heat shield unexpectedly stripped away from the capsule during reentry as temperatures increased to nearly 5,000° Fahrenheit (2,760° Celsius).
The spacecraft safely splashed down, and if any astronauts had been aboard, they would have been fine. However, the inspections of the recovered spacecraft showed divots of heat shield material were missing. The heat shield material, called Avcoat, is designed to erode away in a controlled manner during reentry. Instead, fragments fell off the heat shield that left cavities resembling potholes.
“A lot of work to do”
NASA launched internal and independent investigations to look into the heat shield issue. Catherine Koerner, NASA’s associate administrator for development of exploration systems, told Ars the inquiry remains open.
“We have not made any formal decisions on the forward path yet because we still are doing analysis,” she said. “There are a lot of complications associated with the heat shield, not only with identifying a root cause, but also figuring out a path forward once we identify that root cause.”
This is a complicated thermodynamic and aerodynamic problem, with engineers studying the combined effects of heating and air resistance as the Orion spacecraft dives deeper into the atmosphere. Victor Glover, the pilot of the Artemis II mission, told Ars earlier this year that ground testing and analyses can only go so far, and some of the dynamics may not be fully understood without more flight data.
Commander Reid Wiseman, mission specialist Christina Koch, and Canadian astronaut Jeremy Hansen will join Glover on the Artemis II mission. They will fly around the far side of the Moon inside the Orion capsule after lifting off from NASA’s Kennedy Space Center in Florida on a Space Launch System (SLS) rocket. Artemis II will pave the way for future landing missions to deliver astronauts to the Moon’s south pole.
But it’s taking longer than NASA officials would have liked to complete the Orion heat shield investigation. Koerner said she didn’t want to estimate how much longer it would take for NASA to come to a decision on what, if anything, to change on the Artemis II mission to reduce the risk to the astronauts.
“The best way to ensure crew safety on any activity, but especially this one in particular, is to make sure that they understand that they’re doing this—the focus of this investigation and the forward path—with crew safety in mind, and not with schedule pressure or any other kind of external pressure from stakeholders,” she said.
Potential solutions to the heat shield issue for Artemis II include altering the spacecraft’s trajectory during reentry or making changes to the heat shield itself. The latter option would require partially disassembling the Orion spacecraft at NASA’s Kennedy Space Center, something that would probably delay the launch date from September 2025 until 2027 at the earliest. Another alternative could be to do nothing and fly the Artemis II mission as is.
“The entire trade space is open,” Koerner said. “But as far as the actual Artemis II mission, right now, we’re still holding to the September ’25 launch date, knowing that we have still a lot of work to do to close out the heat shield investigation.”
Support Techcratic
If you find value in our blend of original insights (Techcratic articles and Techs Got To Eat), up-to-date daily curated articles, and the extensive technical work required to keep everything running smoothly, consider supporting Techcratic with Bitcoin. Your support helps me, as a solo operator, continue delivering high-quality content while managing all the technical aspects, from server maintenance to future updates and improvements. I am committed to continually enhancing the site and staying at the forefront of trends to provide the best possible experience. Your generosity and commitment are deeply appreciated. Thank you!
Bitcoin Address:
bc1qlszw7elx2qahjwvaryh0tkgg8y68enw30gpvge
Please verify this address before sending any funds to ensure your donation is directed correctly.
Bitcoin QR Code
Your contribution is vital in supporting my efforts to deliver valuable content and manage the technical aspects of the site. To donate, simply scan the QR code below. Your generosity allows me to keep providing insightful articles and maintaining the server infrastructure that supports them.
Privacy and Security Disclaimer
- No Personal Information Collected: We do not collect any personal information or transaction details when you make a donation via Bitcoin. The Bitcoin address provided is used solely for receiving donations.
- Data Privacy: We do not store or process any personal data related to your Bitcoin transactions. All transactions are processed directly through the Bitcoin network, ensuring your privacy.
- Security Measures: We utilize industry-standard security practices to protect our Bitcoin address and ensure that your donations are received securely. However, we encourage you to exercise caution and verify the address before sending funds.
- Contact Us: If you have any concerns or questions about our donation process, please contact us via the Techcratic Contact form. We are here to assist you.
Disclaimer: As an Amazon Associate, Techcratic may earn from qualifying purchases.